Still many of you may be using wired mouse for your laptop and facing the difficulty same as mine it doesn't works because the wire being folded now and then...
So I found it useful if we remove the cable and use a data cable !!!
So I found it useful if we remove the cable and use a data cable !!!
when u will open the mouse you will find the circuit like the one which is shown in the figure I have cut the wire and placed besides, look carefully I have opened the usb male you will find four different coloured wires over there soldered.
now see the next figure in which I have attached mini usb socket. the socket is easily available in the market and its very cheap also.....
Now solder the wires into the mini usb but remember the supply wires are always on sides of the usb and the D+ and D- inside...
Now solder the wires into the mini usb but remember the supply wires are always on sides of the usb and the D+ and D- inside...
now put the circuit back into the case and try to attach the mini usb with the adhesive
